MDTPL manufactures Thread Rolling Flat Dies for Production and Precision Thread Rolling of all kinds of Fasteners made of Mild Steel,High-strength Steel and Stainless steel.

The dies are made of Selected Cold Work Tools Steel,which is carefully Machined,Grinded and Heattreated.Thread Rolling Flat Dies are made in Ground Form and also in Milled Form.

MDTPL manufactures Thread Rolling Flat Dies for lengths upto 400mm and widths as per following thread sizes:

     THREAD PITCH      MAX.DIES WIDTH     THREAD FORM

      0.5MM-0.8MM               50MM (2”)      GROUND & MILLED

      1.0MM-4.0MM             102MM(4”)     GROUND  & MILLED

      1.5MM-3.0MM             150MM (6”)         MILLED ONLY

            8 TPI-26 TPI           102MM(4”)     GROUND & MILLED

            8TPI-20TPI             150MM(6”)          MILLED ONLY  

           28TPI-40TPI             50MM(2”)       GROUND & MILLED

            2BA-6BA                  50MM(2”)       GROUND & MILLED

Thread Rolling Flat dies are made foe all standard Indian Machine Sections and also for other sections like Waterbury Farrel,Hilgeland,saspi,Ingramatic,Chun-zu type blocks.

Ground Thread Dies are supplied in both Grit Blast and shining Finish.

MDTPL manufactures Circular Thread Rolling Dies for Precision Thread Rolling of Fasteners,auto-parts and components.These rolls are Generally made from Cold work Tools Steel (D2/equivalent material) and also made in High Speed Steel (M2).These dies have accurately Ground thread forms and give high life.

Circular Thread Rolling Dies are made in Both types of feed,Thru-feed and In-feed type. Special treated dies are also made foe thread rolling of tough to roll materials like Stainless steel and Fasteners of After Heattreatment state (AHT) .

 MDTPL makes Circular Thread Rolling Dies in Maximum diameter upto 300mm and width maximum 250mm with any size of Bore diameter.3 pc.sets are also made as per requirement.These dies are made for all thread standards viz.Metrics ( Pitch 0.8mm-6mm),Unifieds/British threads (Pitch 4 tpi-32 tpi) and other thread forms like ACME,Knuckle,Buttress etc.

MDTPL manufacture tangential chasers for thread cutting on pipes,Fasteners and bars. These chasers are generally made suitable for Landis,Lance,Landmatic type die heads and also made for Heaps,Wagner and other type of dieheads.These chasers are made from High Seed Steel,generally in M2 grade.These chasers are made in 4piece sets and 6 piece sets for bigger die-heads are also manufactured.

Tangential chasers have accurate fitting,thread profile and good life.

The chasers are made for folloeing  thread standards:

Metrics: 0.5mm- 8mm Pitch

Inches : 4 tpi-40 tpi.